
Summer Dam Checklist: 5 Things to Do Before the Heat Hits
Check It Off: Your November To-Do List
Summer has a way of arriving all at once. One week you’re enjoying mild spring mornings, and the next the paddocks are crisping up and the dam is dropping faster than you’d like. For anyone relying on a farm dam for stock water or irrigation, the weeks before the heat are the best time to get prepared.
Here are five jobs to tick off now, while the weather is still on your side.
1. Inspect the dam wall
A quick walk around the embankment can save you a costly repair later. Look for:
- Cracks or slumping on the wall, especially along the crest and downstream face
- Seepage or wet patches on the downstream side, which can signal internal erosion
- Burrows from rabbits, wombats, foxes or yabbies, which weaken the structure
- Trees and deep-rooted shrubs on the wall, whose roots create pathways for water
Small problems are cheap to fix in spring. In the middle of a hot, dry summer with the water level low, they’re harder to deal with.
2. Get ahead of algae and water quality
Warm, still, nutrient-rich water is the perfect recipe for blue-green algae, which can be toxic to livestock, pets and people. Before temperatures climb:
- Check the water now so you have a baseline to compare against later
- Reduce nutrient runoff by keeping fertiliser, effluent and heavy stock traffic away from the catchment
- Consider aeration or a bubbler system if your dam is prone to stratifying and going stagnant
- Know what blue-green algae looks like (a paint-like scum or green clumps on the surface) and keep stock off the water if you spot it.
If you’re unsure about a bloom, don’t take chances have the water tested
3. Cut down on evaporation
In many parts of Australia, a farm dam can lose a large share of its depth to evaporation over a year, and most of that happens in summer. You can’t stop it entirely, but you can slow it down:
- Plant windbreaks on the prevailing wind side to reduce the wind sweeping across the surface
- Add shade with trees on the northern and western edges, planted well clear of the wall
- Consider floating covers or surface products if the water is especially valuable
- Think about shape if you’re building or redesigning, since deeper, narrower dams lose less than wide, shallow ones
Even modest improvements add up over a long, hot season.
4. Protect the banks and set up stock water
Cattle and sheep wading into a dam stir up mud, erode the banks and foul the water. Dirty water is a health problem for stock, and a turbid dam also heats up faster.
The fix is to fence the dam and pipe the water out to troughs. This gives you:
- Cleaner water and healthier animals
- Stable banks with less erosion
- Room for fringing vegetation that filters runoff
Take this chance to service pumps, check float valves, clean troughs and test your pipe connections. Finding a broken fitting in the first heatwave is no fun.
5. Work out your summer water budget
Don’t wait until the dam is half empty to find out whether it will last. Spend a little time now on a simple plan:
- Note your current level with a marker post or a photo from the same spot, so you can track the drop week to week
- Estimate demand by working out how many head you’re running, what they’ll drink in hot weather, and what you’ll draw for irrigation or other uses
- Compare supply and demand and work out roughly when you’d run short if no rain came
- Line up a backup such as a tank or a water carter, and set a trigger level for when you’ll use it
- Schedule changes like destocking or moving stock to other paddocks before you’re forced to
A plan made in November can take the stress out of a dry January.




